Using The Smart Setup Wizard - NETGEAR RangeMax WPN824 Reference Manual

Reference Manual for the RangeMax Wireless Router WPN824

Using the Smart Setup Wizard

You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection. The Smart Setup Wizard is not the same as the Smart Wizard configuration assistant
(as illustrated in Figure
you configure the wireless router, the Smart Wizard configuration assistant will not appear again.
To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection settings, follow this procedure:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field of
your browser, then click Enter.
2. For security reasons, the router has its own user name and password. When prompted, enter
admin for the router user name and
letters. To change the password, see
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
WPN824 router and display the home page as shown in
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, use
basic problems, or see
3-12
3-1) that only appears when the router is in its factory default state. After
password
"Changing the Administrator Password" on page
Chapter 7, "Troubleshooting".
v1.0, November 2005
for the router password, both in lower case
Figure 3-5 on page
"Troubleshooting Tips" on page 3-4
Connecting the Router to the Internet
6-9.
3-7.
to correct