Overview Of How To Access The Wireless Router - NETGEAR RangeMax WPN824 Reference Manual

Overview of How to Access the Wireless Router

The table below describes how you access the wireless router, depending on the state of the
wireless router.
Table 3-1. Ways to access the router
Router State Access Options
Factory Default Automatic Access via
the Smart Wizard
Configuration
Note: The wireless Assistant
router is supplied in
the factory default
state. Also, the
factory default state
Manually enter a URL
is restored when you
to bypass the Smart
use the factory reset
Wizard Configuration
button. See
Assistant
"Restoring the
Default
Configuration and
Password" on
page 7-7 for more
information on this
feature.
Configuration Enter the standard
Settings Have URL to access the
Been Applied wireless router
Enter the IP address
of the
router
wireless router
Connecting the Router to the Internet
Reference Manual for the RangeMax Wireless Router WPN824
Description
Any time a Web browser is opened on any computer
connected to the wireless router, the wireless router will
automatically connect to that browser and display the
Configuration Assistant welcome page.
There is no need to enter the wireless router URL in the
browser, or provide the login user name and password.
You can bypass the Smart Wizard Configuration Assistant
feature by typing
http://www.routerlogin.com/basicsetting.htm
in the browser address bar. You may be prompted for a user
name and password. The user name is admin and the
default password is password.
This will enable you to manually configure the wireless router
even when it is in the factory default state. When manually
configuring the router, you must complete the configuration
by clicking Apply when finished entering your settings. If you
do not do so, a browser on any computer connected to the
router will automatically display the router's Configuration
Assistant Welcome page rather than the browser's home
page.
Connect to the wireless router by typing either of these URLs
in the address field of your browser, then click Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
The wireless router will prompt you to enter the user name of
admin and the password. The default password is
password.
Connect to the wireless router by typing the IP address of the
wireless
wireless router in the address field of your browser, then click
to access the Enter. 192.168.1.1 is the default IP address of the wireless
.
router. The wireless router will prompt you to enter the user
name of admin and the password. The default password is
password.
v1.0, November 2005
3-5