Remote Access - Re-Tell Retell 540 office Manual

Remote access

You can access your Retell 540 office remotely from anywhere in the world using
the keypad on a tone-enabled (DTMF) telephone. You need a personal remote ac-
cess code to access the phone remotely. You can set your personal remote access
code as described in "Settings" (Page 79).
Remote access
Call Retell 540 office.
Start entry with the star button.
Enter the remote access code via
the telephone keypad. If you make
a mistake delete entry using the
star key and start again.
To confirm the entry press the hash
button.
Start the desired function by enter-
ing the corresponding number.
Press digit 8 to end a function.
End remote access by pressing star
and hash in succession.
180 seconds after the last button entry your Retell 540 office asks whether you
are still on the line with the "Please quit" voice message. You must respond to
this quit request within 8 seconds by pressing any key otherwise the device
breaks the connection.
Remote access
You hear the OGM.
The OGM stops.
A voice message confirms recognition of
each digit.
If the correct code is detected your Retell
540 office notifies you via a voice mes-
sage. If the code is wrong the device
breaks the connection.
If there are new messages playback
starts automatically.
The current function ends.
39