Back-up batteries provided to protect OGM in the event of power cut Ring selector to answer on 2/3/4 or 5 rings Personal info/dictate function The Retell 208 is compatible with most analogue telephone lines of the public telephone network and many analogue PABX extensions...
Should you pick up a telephone that is on an extension of the telephone line and not connected through the Retell 208 it will not stop the OGM from being played and the call will still be recorded.
Your Retell 208 can be wall mounted to save space. Fix two screws 136mm apart on the wall you wish to mount the 208. The screw heads must protrude about 7mm from the wall. You can now hook your Retell 208 into the two screw holes on the top of the housing.
This rewinds the micro cassette This starts the recording of the current telephone conversation Press and hold both keys for 2 seconds to alter the number of rings the Retell 208 answers after Press and hold both keys for 2 seconds to alter the maximum length of incoming message...
Recording Outgoing Message (OGM) Your Retell 208 can operate in two ways as an answering machine: Standard Mode – OGM + recording possibility + end OGM For this operation you need to record first an OGM then an end OGM. An example of an incoming message with possibility to leave a message is: Hello, this is the answering machine of .…...
Transferring the OGM to the micro cassette The OGM is stored initially on the built-in memory on the Retell 208. This memory is backed-up by the three AAA batteries when the unit is unplugged from the mains however, should these batteries become flat whilst unplugged from the mains then the OGM will be lost.
10 times. The only limit to the number of ICM that can be stored is the length of the micro cassette. The LCD will switch off and the Retell 208 will no Press the button to turn off the...
Recording a Memo You can also use the Retell 208 as a memo recorder. As above, make sure that there is sufficient space on the micro cassette before starting recording. You can now speak your memo into the microphone. The LED will start to...
Answering Machine Settings Setting the number of Ring Tones You can alter the number of rings before the Retell 208 answers a call: Press the and the buttons The LED will start flashing together for at least 2 seconds 1 ring...
Re-record a new OGM that is longer than 7 seconds but less than 25 seconds or an end OGM that is longer than 1 second but less than 7seconds The Retell 208 is producing three ‘beeps’ You have entered an impossible function Check the key combination you are entering...
Hereby Retell declares that this answering machine, Retell 208, is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. Retell declares that your Retell 208 meets the requirements of Class 1 of the R&TTE directive and so is designed as not to adversely affect the operation of the telecommunications network.