Getting started
Parts supplied
Your Retell 540 office package contains:
•
Retell 540 office
•
Telephone connection cable
•
Mains plug 11.5V / 350 mA
•
2 transfer cables - 3.5mm stereo to stereo cable and a 3.5mm stereo to phono
lead
•
Operating instructions with separable brief operating instructions and operating
card for remote control
Installation
Your Retell 540 office has been produced for normal operating conditions. Solutions
in furniture varnish, cleaning oils or paint cleaners can attack the rubber feet on the
base. Damaged feet may leave tracks behind on the furniture.
Therefore use a non-slip mat especially for new or freshly treated furniture.
Connecting
Before you can use your Retell 540 office you first need to connect all the necessary
cables.
1
Fit the small connector of the mains plug into the "POWER" jack and the plug
into a 230 V socket outlet.
2
Fit the small connector of the telephone connection cable into the "LINE" jack
and the BT plug into the telephone socket
3
If you want to transfer incoming messages to an external medium fit the trans-
fer cable with the jack plug to the "OUT" socket and the phono plug to the au-
dio input on the external device (audio system, cassette recorder etc.).
Getting started
12