Hitachi D 13VB3 Technical Data And Service Manual page 20

8-2-4. Reassembly of the gear cover section
Figure 12 shows the assembly drawing. Reassemble the gear cover section according to the following figure.
Models D 13VH and D 10VJ
Pin D5 <20> (20)
Shift Arm <19> (19)
Shift Lever Ass'y <15> (15)
Spring (H) <16> (16)
Steel Ball D3.5 <17> (17)
Gear Set <21> (21)
Ball Bearing
6202DDCMPS2L <6> (6)
CAUTION:
Mounting directions of the Shift Arm <19> (19) and the Gear Set <21> (21) are specified. Mount these parts in
the specified directions as shown in the above figure.
Second Pinion and Gear Set <11> (11)
Spindle (E) <4> (4)
Fig. 12
--- 17 ---
Washer (B) <10> (10)
Retaining Ring for D35 Hole <5> (5)