A/V Presets - NAD M15 HD Owner's Manual

OPERATION
USING THE M15 HD – SETUP MENU

A/V PRESETS

The M15 HD's simple but powerfully flexible system of "A/V Presets" allows
you to customize virtually every aspect of your audio-video playback, and
recall them with a single key-press. The parameters "Listening Mode", "DSP
Options" and "Tone Controls" accessible via the "Main Menu" together with
"Speaker Setup" and "Display Setup" configurable through "Setup Menu" are
stored together as a single A/V Preset.
You might create one A/V Preset optimized for pop music and another for
classical. One more A/V Preset can be set up to recall each family member's
favorite setting or one for fully cinematic home-theater playback and yet
another one for late-night movies, with each A/V Preset fine-tuned to a
particular scenario or preference.
CREATING PRESETS
Creating an A/V Preset consists simply of storing a complete set of the
parameters set forth in "Listening Mode", "DSP Options" and "Tone Controls"
accessible via the "Main Menu" together with "Speaker Setup" and "Display
Setup" configurable through "Setup Menu".
Scroll to "A/V Presets" using the [ D/F ] keys to save a collection of said
parameter settings to a Preset. Select a Preset number and by pressing the
[ D/F ] keys, you can selectively include in the particular A/V Preset any of
the above-mentioned parameter settings by choosing "Yes". If you decide
not to include in the particular A/V Preset a certain parameter setting, select
"No".
Now in order to save the settings chosen for the particular A/V Preset
number, scroll down to "Save Current Setup to Preset" and press the [ S ]
key. If you chose to load instead the default settings, scroll down to "Load
Defaults to Preset" and press the [ S ] key to restore the default settings.
In addition to the parameter settings, the A/V Preset label itself can be
assigned a new name. This new Name will be shown in the VFD as well as
on the OSD.
To rename the A/V Preset label, scroll to "Name" and press [ S ] to go the first
character. Then, press [ D/F ] to pick and select through the alphanumeric
selections. Press [ A/S ] to move to the next character or back to the
previous character and at the same time save the changes done on the
current character.
NOTE
The selected A/V Preset remains in force until you select a different A/V
Preset.
28
SAMPLE PROCEDURE FOR SETTING UP A/V PRESETS
1 Setup first your preferred settings for the following options (access
them through their respective menu page).
Listening Mode: Stereo
DSP Options: 5ms
Tone Controls: Tone Defeat: On
Display Setup: Set "Line 2" to "Listening Mode"