Changing The Display; Using The Sleep Timer - Sony HT-DDW8500 Operating Instructions Manual

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
All inputs except the FM and AM
band
Index name of the input
t Sound field currently applied
FM and AM band
a)
t Frequency t Sound
Preset station name
field currently applied
a)
Index name appears only when you have assigned
one to the input or preset station (page 40, 64).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character or marks may not be displayed for some
languages.
a)
t Selected input

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press SLEEP, the display
changes cyclically as follows:
1-30-00 t 1-00-00 t 0-30-00
2-00-00 t
t OFF
When sleep timer is being used, "SLEEP"
lights up in the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
73 GB