Sony HT-DDW8500 Operating Instructions Manual page 15

Name Function
S
Press to input the decimal
z
(RM-AAU021
point for channel numbers of
only)
the Digital CATV terminal.
Press
same time to input the decimal
point for the channel numbers
of the TV.
-/-- Press to select the channel
(RM-AAU023
entry mode, either one or two
only)
digits of the VCR.
Press -/-- and TV (O) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10 Press to select the track
numbers over 10 of the CD
player.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
T Numeric
Press to
buttons
– preset/tune to preset
a)
(number 5 )
– select track numbers of the
– select channel numbers of
Press the numeric buttons and
TV (O) at the same time to
select the TV channels.
U TV INPUT
Press TV INPUT and TV (O)
at the same time to select the
input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
a)
The number 5, TV VOL +, MASTER VOL + and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
b)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, refer to the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
and TV (O) at the
z
stations.
CD player, DVD player or
Blu-ray disc player. Press
0/10 to select track number
10.
the VCR or satellite tuner.
Notes
• The CATEGORY +/– and CATEGORY MODE
buttons on the remote (RM-AAU021) are not
available for the receiver operation.
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
15
GB