Specifications - Sony HT-DDW8500 Operating Instructions Manual

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy
the problem (page 32). However, note that all
memorized settings will be reset to their initial
settings and you will have to readjust all
settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
Models of area code AU, E51, SA, EA, CA
• Receiver (STR-KM7500)
Power Output
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
Surround mode output (reference)
FRONT:
CENTER:
SURROUND:
SURROUND BACK:
See
page 32
• Power amplifier (TA-KMSW500)
page 60
RMS output (6 ohms, 80 Hz, THD 10%)
Input
1)
Measured under the following conditions:
Area code
E51, SA
EA
AU
CA
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
Inputs
Analog
Digital (Coaxial) Impedance: 75 ohms
1)
100 W + 100 W
2)
RMS output
1)
185 W per channel
(with SS-MSP7500)
1)
185 W
(with SS-CNP7500)
1)
185 W per channel
(with SS-SRP7500)
1)
185 W per channel
(with SS-SRP7500)
1)
200 W per channel
LINE IN (input pin jacks)
Power requirements
240 V AC, 50 Hz
127 V AC, 60 Hz
230 V AC, 50 Hz
120 V AC, 60 Hz
Sensitivity: 800 mV/
50 kohms
continued
83 GB