Automatic Ignition With Flame Failure Safety Device (All Models) - Baumatic AS26SS Instruction Manual

o The symbol on the control panel, next to the control knob will
indicate which gas burner it operates.

Automatic ignition with flame failure safety device (all models)

The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head in
the event of the flame going out.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
o After this 20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
symbols.
o In case of power failure, the burners can be lit by carefully using
a match.
o To turn the burner off, turn the control knob fully clockwise to
the gas off position.
o In case of power failure, the burners can be lit by carefully using
a match.
21