Table of Contents
Advertisement
SwannEye IP Camera
3.
Product Layout
3.1.
Front view
Infrared
LEDs
Light Sensor
Microphone
Power LED
Network
Activity LED
3.2.
Rear View
DC5V
RJ45
Reset Button
Antenna
Mount
Light Sensor
Infrared LEDs
Network
LED
CMOS Lens Sensor
Built-In Microphone
Audio output socket
RJ45
socket
DC5V/1.5A socket
Antenna mount
Alarm I/O Block
Speaker
(not pictured)
Audio Alarm
I/O Block
Light Sensor detects low light and
switches to night vision
These allow the camera to achieve
night-vision up to 33ft/10m.
Activity
This will flash when there is
information being sent over a
network to or from the camera,
either wired or wireless.
The lens is fixed and cannot have its
focus manually adjusted.
Lets you listen remotely to activity
near the camera.
Connect speakers or headphones
to this socket to hear what is being
captured by the cameras internal
microphone.
(Ethernet)
RJ45 10/100 Base-T plug. Connect
the camera to your network router
here.
Connect the supply here.
Connect
antenna here to achieve wireless
communication.
For connecting external alarms and
sensors.
The camera features a built-in
speaker - it's located inside the case,
near the Alarm I/O Block.
the
WiFi
(wireless)
7
Advertisement
Table of Contents
