Table of Contents
Advertisement
SwannEye IP Camera
6.1.1.
Device Information
Some basic information is provided such as Device name and the System/App
Firmware Version numbers.
6.1.2.
IP Config
This page is used to configure the network settings.
Set IP Automatically
from the DHCP server. The camera needs to be connected to a router via ethernet
(LAN) cable and the router needs to have DHCP capabilities.
To trigger this selection, you will need to enter the username (default: admin)
and password (default: 123456) and click Update (F5) and Yes to confirm. The
camera will reboot and when restarting, will attempt to get an IP address from
the DHCP server.
(Recommended): Check this box to obtain an IP address
13
Advertisement
Table of Contents
