SwannEye IP Camera
8.4.21. Restore Factory Settings
This resets all the settings in the camera back to the way they were when left the
factory. Use this carefully since it will delete any settings or preferences such as
your network settings and you will have to re-setup the camera again.
8.4.22. Reboot Device
This shuts down and restarts the camera as if it was just turned on. You will not lose
any settings you have made. Use 'Reboot' as a first attempt to fix any issues you
may be experiencing with the camera. This can usually resolve many networking
issues.
A warning dialog will appear asking you to confirm whether you want to reboot
the camera. Click 'OK' and wait for the camera to restart fully before proceeding.
8.4.23. Home
Return to the login screen (see "7.2. Login page" on page 17).
48