Swann SwannEye User Manual page 41

SwannEye IP Camera
Upload Images on Alarm: Check this box if you want to send an image when an
alarm is triggered.
Upload Interval (Seconds): Set an interval (in seconds) between each upload .
Scheduler: Use the scheduler to limit motion triggered to only certain periods.
The files will be saved to the default path as specified under 'Motion Detect
Sensibility. '
The scheduler is a grid showing a seven day period with each day split into 15
minute blocks. Click on a 15 minute block to select it. Double-click on a 15 minute
block within any one hour period to select the entire hour. Click or double-click
to de-select a period or hour block.
Motion detection needs to be activated (armed) for this to work and the browser
window needs to be open and logged in to your camera. If you close the browser
window, you can still receive email alerts but no recording will take place.
Note: The camera will only record for 15 minutes if it is set to constantly record
during that period. When motion is detected during a time block, the camera only
records for a few seconds, sends out any email alerts or picture uploads (if set) and
then returns to monitoring mode.
41