Table of Contents
Advertisement
8.4.13. FTP Settings
Set up FTP credentials so that the camera can send warnings and captured images
to an FTP server.
Note: When Alarm Service Settings->Upload Image on Alarm is checked, the
FTP Service takes effect.
Set these parameters to enable upload of images to an FTP server when an alarm
triggers.
FTP
Server: The FTP server address.
FTP
Port: The port is usually 21.
FTP
User: The username for the FTP account.
FTP
Password: The password for the FTP account.
FTP Upload
Folder: Set the folder on the remote server you want the images to
be stored.
FTP
Mode: Set the FTP mode. (PORT) mode and passive (PASV) mode are
supported. Use PASV in most situations, especially if you are behind a NAT firewall.
Test (FTP)
button: Test your settings by making a test FTP connection.
Make sure you press SUBMIT first to save your changes!
Upload Image
Now: Check the box to upload an image to a server. When checked,
the Upload interval option appears.
Upload Interval
(seconds): Set the time (in seconds) between each image
upload.
Undefined: This option has no function.
38
SwannEye IP Camera
Advertisement
Table of Contents
