Fcc Licensing Information - Motorola MaxTrac 100 Operating Instructions Manual

FCC Licensing Information

FCC Regulations state that:
1. The grantee of a license has the responsibility of assuring that all equipment
operated under that license conforms to the specifications of the license.
2. The RF power output of a radio transmitter shall be no more than that
required for satisfactory technical operation, considering the area to be
covered and local conditions.
3. The frequency stability, deviation, and power of a radio transmitter must be
maintained within specified limits. Specifically, FCC Part 90.215 states that
"the licensee of each station shall employ a suitable procedure to determine
that the carrier frequency of each transmitter authorized to operate with an
output power in excess of two watts is maintained within the tolerance
prescribed in 90.213..." It is recommended, therefore, that these three
parameters (frequency stability, deviation, and power) be checked before the
station is placed in service if modified.
Remember: The efficiency of the equipment depends upon a good installation.
Motorola recommends that adjustments to this equipment be made ONLY by a
certified technician.
Important
FCC Licensing Information 19