Operation - Victory Vegas Jackpot Rider's Manual

Victory 2014 rider’s manual
Hide thumbs Also See for Vegas Jackpot:
Table of Contents

Advertisement

The operation section describes how to operate your VICTORY motorcycle to ensure the
best performance and longevity of the engine and other components. Information includes:
• Engine Break-in Period
• Fueling and Fill Height
• Starting the Engine
• Shifting Gears
Follow all safe riding practices outlined in the safety section. See page 7.
During the first 500 miles (800 km), critical engine parts require special wear-in procedures
so they seat and mate properly. Read, understand and use the following rules for operating
the motorcycle during the first 500 miles (800 km).
NOTICE: Do not put unnecessary load on the engine during the first 500 miles (800 km). Avoid
prolonged full throttle operation or any condition that creates excessive engine heat.
Engine Break-in Period
NOTICE: If engine trouble should occur during the engine break-in period, consult the maintenance
section of the Rider's Manual, the VICTORY Service Manual, or an authorized VICTORY
dealer immediately.
Failure to perform the initial maintenance as recommended could result in less than
desirable engine performance in the future. Perform the initial maintenance as
recommended.
Odometer
Reading
Miles
Kilometers
0-90
0-145
90-300
145-483
300-500
483-800
At 500
800
Do not operate for extended periods of time at throttle positions above
1/3 throttle. Vary the engine speed frequently. Do not operate for
extended periods of time at any one throttle position.
Do not operate for extended periods of time at throttle positions above
1/2 throttle. Vary the engine speed frequently. Do not operate for
extended periods of time at any one throttle position.
Do not operate for extended periods of time at throttle positions above
3/4 throttle.
Perform the initial maintenance as described in the maintenance sec-
tion of the Rider's Manual. This critical maintenance should be per-
formed by an authorized VICTORY dealer. Initial maintenance includes
servicing all adjustments, tightening all fasteners and changing engine
oil.
• Accelerating
• Braking
• Stopping the Engine
• Parking
Instructions

Operation

45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents