Sony SHAKE-100D Operating Instructions Manual page 58

First 3
characters of
the service
number
E XX
(XX is a number)
Messages
One of the following messages may
appear or flash in the display panel during
operation.
CANNOT PLAY
• A disc that cannot be played back was
inserted.
• A DVD VIDEO with unsupported
region code was inserted.
DATA ERROR
• The file does not conform to the
required format.
• The file extensions does not match the
file format.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of audio files or folders on the USB
device failed.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may have
been damaged.
58 GB
Cause and corrective
action
To prevent a
malfunction, the system
has performed the self-
diagnosis function.
• Contact your nearest
Sony dealer or local
authorized Sony
service facility and
give the 5-character
service number.
Example: E 61 10
FOLDER FULL
You cannot transfer onto the USB device
because the number of folder has reached
its maximum.
NO DEVICE
No USB device is connected.
NO DISC
There is no disc on the disc tray.
NO MEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO MUSIC
MP3/WMA/AAC data does not exist in
MUSIC playback mode.
NO PHOTO
JPEG data does not exist in PHOTO
playback mode.
NO STEP
All of the programmed steps have been
erased.
NO VIDEO
MPEG4/Xvid data does not exist in
VIDEO playback mode.
NOT IN USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
NOT SUPPORTED
An unsupported USB device is connected
or the USB device is connected through a
USB hub.
OFF TIME NG
The on time and off time of Play Timer or
Recording Timer is the same.
PARTY GUEST
The system becomes a Party Guest when
Party Chain function is activated.
PARTY HOST
The system becomes a Party Host when
Party Chain function is activated.