Sony SHAKE-100D Operating Instructions Manual page 57

There is severe hum, noise, or
distorted sound.
• If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
• If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
• Turn down the volume of the connected
Bluetooth device.
Party Chain
Party Chain function cannot be
activated.
• Check the connections (page 46).
• Make sure the audio cords are connected
correctly.
"PARTY CHAIN" is flashing in the
display panel.
• AUDIO IN 1 function is selected during
Party Chain function. Press
FUNCTION repeatedly to select other
function.
• Restart the system.
Party Chain function does not operate
properly.
• Turn off the system. Then, turn on the
system to activate the Party Chain
function.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform this
operation.
1
Unplug and plug the power cord
back in.
2
Press "/1 to turn on the system.
3
Hold down x and LED COLOR at
the same time for about 3 seconds.
"RESET" appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Returning the "SETUP" settings to
the default
You can return the "SETUP" settings
(except for "PARENTAL CONTROL"
settings) to the default settings.
1
Hold down SHIFT, then press
SETUP.
2
Press / repeatedly to select
[SYSTEM SETUP], then press
3
Press / repeatedly to select
[RESET], then press
4
Press / repeatedly to select
[YES], then press
It takes a few seconds to complete. Do
not press "/1 when resetting the
system.
Self-diagnosis Function
When letters/numbers appear in the
display panel
When the self-diagnosis function is
activated to prevent the system from
malfunctioning, a 5-character service
number (e.g. C 13 50) with a combination
of a letter and 4 digits appears on the TV
screen or in the display panel. In this case,
check the following table.
First 3 Cause and corrective
characters of action
the service
number
C 13 This disc is dirty.
• Clean the disc with a
soft cloth (page 59).
C 31 The disc is not inserted
correctly.
• Restart the system, then
re-insert the disc
correctly.
.
.
.
57 GB