Sony SHAKE-100D Operating Instructions Manual page 36

Transferring analog audio
(Analog Transfer)
You can transfer sound from an analog
audio source (other than DVD/CD, USB
or Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
2
Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
4
Press ENTER.
The transfer starts when "DON'T
REMOVE" appears in the display
panel.
5
Start playing the source.
To stop transfer
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
"NEW TRACK" appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
36 GB
B port (page 35).
Erasing audio files or folders
on the USB device
1
Press USB repeatedly until
"USB A" or "USB B" lights up in
the display panel.
2
When playback is stopped, hold
down SHIFT, then press
OPTIONS.
3
Press / repeatedly to select
"USB ERASE", then press
The Folder List is displayed on the TV
screen.
4
Press / to select a folder,
then press
5
Press / to select the audio
file you want to erase, then
press .
Select [ALL TRACKS] to select all
audio files in the folder.
"FOLDER ERASE" or "TRACK
ERASE" and "PUSH ENTER"
appears in the display panel.
To cancel, press x.
6
Press .
"COMPLETE" appears in the display
panel.
To exit OPTIONS menu, hold down
SHIFT, then press OPTIONS.
Note
A folder that contains non-MP3/WMA/AAC
format audio files or sub folders cannot be
erased.
.
.