Wireless Setup - Brother MFC-8950DW Quick Setup Manual

WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
electrical socket, you can protect yourself
from potentially hazardous electrical
conditions on the telephone network by
keeping the power cord connected to your
machine when you connect it to a telephone
line. Similarly, you can protect yourself when
you want to move your machine by
disconnecting the telephone line first and then
the power cord.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
a Extension telephone
b External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
a Extension telephone answering machine
(not supported)
b External telephone answering machine
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 8. For
additional details, see Connecting an
external TAD in the Basic User's Guide.
5
a
b
(Example for U.K.)
(Example for U.K.)

Wireless setup

(if needed)
Do one of the following:
If you are using a Macintosh computer or a

mobile device on a wireless network, you
can configure the wireless settings by
pressing the button at the top right on
the Touchscreen. Go to b.
 If you are using a Windows
to connect your Macintosh using USB or
wired network, or want to change the initial
settings on your machine first, skip this step
and go to step 6. You will be able to
configure the wireless settings later.
Press the button on the Touchscreen.
Then go to step 17 on page 23 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 6 to finish the machine setup.
®
computer, want
7