Set The Telephone Line Type - Brother MFC-8950DW Quick Setup Manual

13
Set the telephone line
type
If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
a
Press Menu.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Phone Line Set.
Press Phone Line Set.
d
Press Normal, ISDN or PBX.
Do one of the following:
If you choose ISDN or Normal, go to step h.

If you choose PBX, go to step e.

e
Do one of the following:
 If you want to change the current prefix
number, press On or Always and go to
step f.
 If you do not want to change the current
prefix number, go to step h.
Note
• The default setting is "!".
• If you choose On, pressing Tel/R (the screen
displays "!") will let you access an outside line.
• If you choose Always, you can access an
outside line without pressing Tel/R.
f
Press Dial Prefix.
g
Enter the prefix number (up to 5 digits) using
the buttons on the Touchscreen, and then
press OK.
Note
• You can use the numbers 0 to 9, #, l and !.
• You cannot use ! with any other numbers or
characters.
• If your telephone system requires a timed break
recall, press ! on the Touchscreen.
h
Press Stop/Exit.
Note
PBX and TRANSFER
The machine is initially set to Normal, which lets
the machine connect to a standard PSTN (Public
Switched Telephone Network) line. However,
many offices use a central telephone system or
Private Automatic Branch Exchange (PABX).
Your machine can be connected to most types of
PABX (PBX). The machine's recall feature
supports timed break recall only (TBR). TBR will
work with most PABX (PBX) systems allowing
you to gain access to an outside line, or transfer
calls to another extension. The feature works
when Tel/R is pressed.
11