Brother MFC-8950DW Quick Setup Manual page 6

d
Put the paper in the tray and make sure:
 The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
 The side to be printed on is face down.
 The paper guides touch the sides of the
paper so it will feed correctly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Lift up the support flap a to prevent paper from
sliding off the face-down output tray.
For more information about recommended
paper, see Recommended paper and print
media in the Basic User's Guide.
6
4
Connect the power cord
and telephone line
Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then plug it into an electrical socket.
b
Turn the machine's power switch on.
Important
DO NOT touch the Touchscreen immediately
after plugging in the power cord or turning the
machine on. Doing this may cause an error.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
Important
The telephone line cord MUST be connected to
the socket on the machine marked LINE.
(Example for U.K.)