BYD F0 Owner's Manual page 67

BYD AUTO
remove frost and fog of the windshields.
2) Without air conditioning
air blower speed any position other
——
than " "
temperature heating position (red
——
region)
air flow floor
——
(2) Cooling (with air conditioning)
To get the best effect, set the controller as
follows:
air blower speed any position other
——
than " "
temperature cooling position (blue
——
region)
air introduction outer circulation
——
(outside air)
air flow instrument panel
——
air conditioner on
——
For fast temperature decrease, select
the inner circulation mode and keep it for
minutes.
(3) Ventilation (with air conditioning)
To get the best effect, set the controller as
follows:
air blower speed any position other
——
than " "
temperature cooling position (blue
——
region)
circulation mode outer circulation
——
(outside air)
outlet mode face blowing
——
AC switch off
——
F0 Owner's Manual
(4) Defogging (with air conditioning)
nterior of the front windshield
I
Optimized settings
air blower speed——any position
other than " "
temperature regulation——heating
(red regions); cooling (blue region)
circulation mode——outer circulation
(outside air)
outlet mode——defogging
AC switch——on
In damp whether, do not blow the
windshield with cold wind; otherwise, more
fog will be produced on the windshield due
to inside-outside temperature difference.
(5) Defrosting
xterior of windshields
E
Optimized settings：
64