BYD F0 Owner's Manual page 52

BYD AUTO
Both of the conditions can indicate certain
monitoring parts in the warning light system
have faults. If either of the conditions
happens, contact a BYD authorized service
station as soon as possible to have the
vehicle checked.
When the ignition key is turned to
position "II", the light shine is on
continually or can not turn on.
The light turns on in driving.
n operation, temporary shining of the
I
warning light does not suggest problem
existence.
Friendly Tips
If the "ABS" warning light
turns on when the brake system
warning light is shining, park the
vehicle in a safe place immediately
and contact a BYD authorized
service station.
Under such cases, not only the ABS
system won't work in braking, but
also the vehicle will
extremely unstable.
(i) SRS warning light (optional)
The ignition key turned to position "II",
the light turns on for about 5s and then goes
out, indicating the airbag system is working
normally.
The warning light system is used for
monitoring the airbag ECU, the collision
sensor, the inflation device, the warning
lights, wires and the power supply.
If any of the conditions happens, it means
certain parts monitored by the warning light
system have faults. Contact a BYD
authorized service station as soon as
possible to have the vehicle checked.
When the ignition key is turned to
position "II", the light turns on for about
5s and then keeps flashing
When the ignition key is turned to
position "II", the light won't shine or
flash.
The light turns on in driving.
become
(j) Lighting indication buzzer
When the parking lights or head lights are
on, the ignition key is turned to position
"0" or taken away, and the door at the
driver side is not closed, the buzzer will
sound to remind the drive to turn off the
parking lights or head lights before leaving
the vehicle.
.
.
F0 Owner's Manual
49