Panasonic Workio DP-C262 Operating Instructions Manual page 77

5
Select the color of the overlay original
from the basic colors and registered
custom colors, and then select "OK".
When selecting from the basic colors
When selecting from the registered
custom colors
If "Add Custom" is selected, Change Color
> Add Custom screen is displayed, and
colors can be registered. Refer to the New
Color Registration (see page 14)
6
Adjust the overlay density with "Lighter"
and "Darker", and then select "OK".
Lighter Overlay density level is
decreased.
Darker Overlay density level is
increased.
7
Select the overlay position, and then
select "OK".
Overlay on Copied with the scanned original
Top overlaid on the overlay original.
Overlay on Copied with the overlay original
Bottom overlaid on the scanned original.
8
Enter the desired number of copies.
9
Press the Start key.
When the overlay copying is completed, the
overlay original registration confirmation
screen is displayed.
When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
10
Select "Yes" or "No".
Yes Register the overlay image.
No Clear the overlay image.
If Hard Disk Drive is installed, you will be
asked where to register the overlay original.
<Continue to the Next Page>
77