Centering - Panasonic Workio DP-C262 Operating Instructions Manual

Centering

The copying image can be centered automatically on selected paper.
This function can be selected when the original is placed on the platen.
As the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and then place original(s) on the
platen, leave it open.
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "More Menus".
4
Select "Zoom / Effects", and then
select "Centering".
68
5
Select the desired type of paper, and
then select "OK".
6
Enter the desired number of copies.
7
Press the Start key.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.