Recalling A Preset Job Stored In Memory - Panasonic Workio DP-C262 Operating Instructions Manual

Recalling a Preset Job Stored in Memory

The specific copy job will be done by recalling the registered preset jobs.
A job called "Double Exposure" is set as default.
Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.
Refer to the Storing a Job in Memory (see page 33).
"M1"/"M2" cannot be registered when Manual Skyshot Mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if set in other
function mode.
3
Select "Preset Jobs".
4
Select a stored job.
Job buttons without names, indicate that
there are no jobs registered.
A confirmation screen appears, asking to
confirm the job recalled.
34
5
Select "Close".
Job settings are reflected.
6
To confirm the job settings, select
"Confirm Settings", and then touch
"Close".
To change the setting, refer to the
Confirming the Selected Copy Features
(see page 32).
7
Enter the desired number of copies.
8
Press the Start key.