Connections; Cable And Vcr Connections - JVC AV-36260 User Manual
Hide thumbs
Also See for AV-36260:
- User manual (52 pages) ,
- User manual (52 pages) ,
- User manual (52 pages)
Table of Contents
Advertisement
Connections
Cable and VCR Connections
There
are three
basic types
of antenna
or cable connections:
• if you have an antenna or have a cable system that does not require you use a cable box to
select channels, please refer to Diagram #f.
• if you have a cable system that requires the use of a cable box to access all the channels,
please refer to Diagram #2. If you cannot operate your Picture-in-Picture
function using Diagram
#2, try the connection shown in Diagram #3. It is possible your cable box allows the signal of only
one channel al a time to be sent 1o your television.
• if you have a cable sysIem mat requires the use of a cable box to access certain premium
channels. 3ut not "basic" cable channels, please refer 1o Diagram #3
•
For your convenience
connecuon [o a VCR is also shown in the following alagrams. A VCR is
nor necessary for operation of the television or Picture-In-Picture
,'PIP) function. You may omit the
VCR from your connections
if you wlsn.
• For nstructJons on connecting
a VCR only, please see the OUiCK Setup on page 8.
• For information
on using PiP, please see page 44.
• The PIP feature
is available on models AV-36260
AV-32260 and AV-27260 only
Diagram #1
WALL
CABLE
or ANIENNA
OU
TWO-WAY
SPUTTER
_
VCR
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF input on the
back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF input on the
back of the TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
If your VCR is a mona sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio input.
Please consult your VCR's owner's manual for more information on its operation.
11
Advertisement
Table of Contents
