Connections; Cable And Vcr Connections - JVC I Art AV-36F803 User Manual

Cable and VCR Connections

There are three basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box
• If you have a cable system that requires the use of a cable box to access all the channels,
• If you have a cable system that requires the use of a cable box to access certain premium
• For your convenience, connection to a VCR is also shown in the following diagrams. A
• For instructions on connecting a VCR only, please see the Quick Setup on page 11.
• For information on using PIP, please see page 47.
• The PIP feature is available on models AV-36F803, AV-32F803 and AV-27F803 only.
Diagram #1
Illustration of AV-27F803
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on
the back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
•
•
Downloaded from: https://www.usersmanualguide.com/
to select channels, please refer to Diagram #1.
please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using
Diagram #2, try the connection shown in Diagram #3. It is possible your cable box allows
the signal of only one channel at a time to be sent to your television.
channels, but not "basic" cable channels, please refer to Diagram #3.
VCR is not necessary for operation of the television or Picture-In-Picture (PIP) func-
tion. You may omit the VCR from your connections if you wish.
AUDIO
R
AUDIO
R
R
AUDIO OUT
AV COMPULINK
back of the TV.
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video
Audio Input jack.
If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the
TV's Left Audio Input.
Please consult your VCR's owner's manual for more information on its operation.
CABLE or ANTENNA
OUT
VIDEO S VIDEO
L MONO
OVER
INPUT 1
OUT OUT
INPUT 2
INPUT 4
COMPONENT COMPONENT
VIDEO VIDEO
L MONO
75Ω
(VHF / UHF)
Y
L
P
B
P
R
OR

Connections

IN
TWO-WAY
SPLITTER
VCR
V L R
IN
OUT
OR
13