JVC AV-36260 User Manual page 9

Step Three -The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television. A complete description of the Plug In Menu can be
found starting on page 22. We recommend you complete the Plug In Menu items before you start
using your television. But to begin watching your television right away you only need to run the Auto
Tuner Setup. This lets your television learn the channels it is able to receive. To run the Auto Tuner
Setup follow the steps below.
PLUG IN MENU r_::=l_..
[_ LANGUAGE ENG FRE SPA
AUTO TUNER SETUP
FINISH
SELECT BY I'_'II_'I
OPERATE BY I'_11_ EXITBY_
Press the AV buttons to move to AUTO TUNER SETUP
Pressthe _1• buttons to begin AUTO TUNER SETUP
TUNER MODE i CABLE AIR
START
_1 • To choose CABLE (if you are connected to a cable system) or AIR (if you use
an antenna)
AT To move to START
_1 • To start Auto Tuner Setup
The Auto Tuner will now memorize all of the dear, active channels your television can
receive. This will take one or two minutes.
I NOW
PROGRAMMING
48
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can continue on
in this guide for more information on connecting audio/video devices, programming your remote control,
or using the JVC onscreen menu system to customize your television viewing expedence.
(_C¢ The Quick Setup
_/ is complete
9