JVC AV-36260 User Manual page 3

IMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions This TV set has been engineered
and manufactured to assure your personal safety But improper use can result in poten-
tial electrical shock or fire hazards In order not to defeat the safeguards incorporated in
this TV set, observe the following basic rules for its installation, use and servidng
And also fellow all warnings and instructions marked on your TV set,
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider
than the other),
(POLARIZED=TYPE)
This safety feature allows the plug to fit into the power outlet only one way Should
you be unable to insert the plug fully into the outlet, try reversing the plug,
Should it still fail to fit, contact your electrician,
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information If you are not sure of the type of power
supply to your home, consult your TV set dealer or local power company For battery
operation, refer to the operating instructions,
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power
cords and broken plugs They may result in a shock or fire hazard, Call your service
technician for replacement
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV
set where power cord is subject to traffic or abuse This may result in a shock or fire
hazard
5 Do not use this TV set near water -- for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near swimming pool, etc
6 If an outside antenna is connected to the TV set, be sure the antenna system is
grounded so as to provide some protection against voltage surges and builbup static
charges, Section 810 of the National Electrical Code provides information with
respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection requirements for the grounding electrode