Pre-Programming - LG-Nortel ARIA SOHO Installation Manual

ARIA SOHO Hardware Description and Installation Manual
STARTING THE ARIA SOHO

6.2.3 Pre-Programming

6.2.3.1 Location PGM – Nation Code and Site Name (PGM 100)
NOTE—The 4th pole of the DIP switch (SW1) on the MBU must be turned ON.
Nation Code
To program the Nation Code, perform the following Steps:
1. Press the [TRANS/PGM] button + PGM number (100) then [FLEX1] + 7 [Nation Code for CIS].
2. Press the [HOLD/SAVE] button to accept the change.
3. Now Rest ARIA SOHO to initialize Database for Nation.
4. Set the 4
features.
Site Name
1. Press the [TRANS/PGM] button +Enter Site Name (use the following DKT Map, Max. 24 digits
allowed), then press [FLEX2].
2. Press the [HOLD/SAVE] button to accept the change.
th
pole (SW1) of the MBU OFF when the System operates normally to protect programmed
CHARACTER BUTTON MAP
Q – 11 A - 21
Z – 12 B - 22
. – 13 C - 23
1 – 10 2 - 20
G – 41 J - 51
H - 42 K - 52
I - 43 L - 53
4 – 40 5 - 50
P – 71
T - 81
Q –72
U - 82
R - 73
V - 83
S - 74
8 - 80
7 – 70
*1 - Blank
*2 - : 0-00
*3 - ,
D - 31
E - 32
F - 33
3 - 30
M - 61
N - 62
O - 63
6 - 60
W - 91
X - 92
Y - 93
Z - 94
9 - 90
47
Issue 1
Mar, 2007