Operation And Indication Section For Remote Control - Mitsubishi Electric SRK63HE-S1 User Manual

Operation and indication section for remote control

Operation section
FAN SPEED button
Each time the button is pushed, the
cator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
Page 14
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
SLEEP button
This button changes to SLEEP operation.
Page 11
CLEAN switch
This switch changes the CLEAN mode.
Page 15
ON TIMER button
This button selects ON TIMER operation.
Page 12
Indication section
SLEEP indicator
Indicates during SLEEP operation.
TEMPERATURE indicator
Indicates set temperature.
(Does not indicate temperature when operation
mode is on AUTO)
FAN SPEED indicator
Indicates set air flow rate with
CLEAN indicator
Indicates during CLEAN operation.
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit – a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
indi-
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
lamp.
Indicates during ON/OFF TIMER operation.
Indicates selected operation with
HE type:
[
CE type:
[
Indicates present time or timer setting time.
Shows selected flap and louver mode.
HI POWER/ECONO MODE indicator
Indicates during HIGH POWER/ECONOMY
mode operation.
– 7 –
OPERATION MODE select button
Each time the button is pushed, the
cator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again for
stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
Page 10
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right) mode.
Page 10
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
OFF TIMER button
This button selects OFF TIMER operation.
Page 11
RESET switch
Switch for resetting microcomputer.
Page 16
TIME SET UP switch
This switch for setting the time.
Page 13
ON/OFF TIMER indicator
OPERATION MODE indicator
lamp.
(Auto) • (Cool) • (Heat) • (Dry)]
(Auto) • (Cool) • (Fan) • (Dry)]
TIME indicator
AIR FLOW indicator
indi-