High Power/Economy Operation Procedure - Mitsubishi Electric SRK63HE-S1 User Manual

HIGH POWER/ECONOMY operation procedure

Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes
continuously. The remote control
NOTE
• During the HIGH POWER operation, the room temperature is not
controlled. When it causes an excessive cooling or heating,press
the HI POWER/ECONO button once more to cancel the HIGH
POWER operation.
• HIGH POWER operation is not available during the DRY and the
program timer operations.
• During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button intlates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. The
unit operates 1.5°C higher than the setting temperature for weak wind capacity during cooling or 2.5°C lower than that during heating. The remote
control indicates but the FAN SPEED indication is eraseed.
NOTE
• It will go into ECONOMY operation the next time the air-condi-
tioner runs in the following instances.
1 When the air-conditioner is stopped using the ON/OFF button.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation.
3 When CLEAN operation ends.
Aim the remote control at the air-conditioner.
1
2
indicates but the FAN SPEED indication is erased.
– 14 –
If the air-conditioner is not operating
Press the ON/OFF button.
Press the HI POWER/ECONO button.
• When the operating mode is AUTO, COOL or HEAT
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
(HIGH POWER) (ECONOMY)
• When the operating mode is DRY or PROGRAM TIMER
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
(ECONOMY)
• When the following operations are conducted HIGH POWER op-
eration will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER operation
has started.
• When the following operations are conducted ECONOMY opera-
tion will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed DRY to FAN.
No indication
(Normal operation)
No indication
(Normal operation)