Choice Of Operations And Features - Mitsubishi Electric SRK63HE-S1 User Manual

Choice of operations and features

Choice of operations
Page 9
HEAT
The unit draws in heat from the outside air,
transfers it inside and heats the room.
Page 9
FAN
Fanning by circulating room air.
Features
Amenity facility
When using the timer to switch on, the sys-
tem should become operational shortly be-
fore the set time, depending on the room
temperature so that the desired temperature
should be reached at the set time.
Adjustment of
airflow
COOL
Cooling by extracting heat from the room.
AUTO
Automatic selection of operating mode.
Page 13
TIMER procedure
There are three timers, for SLEEP, ON and
OFF. They can be set as desired.
Page 10
• MULTI-DIRECTIONAL AIR FLOW
This function sets the unit at the most suitable angle
for blowing, imitating a natural breeze.
• SWING FLAP
Flap moves up and down continuously.
• SWING LOUVER
Louver moves left and right continuously.
• MEMORY FLAP (FLAP OR LOUVER STOPPED)
Once the flap or louver position has been set, the unit
will memorise it and continue in the same position
the next time.
Page 9
Drying by extracting damp from the room.
Functioning of microcomputer depends on
setting and room temperatures. It dehumidi-
fies while keeping room temperature almost
constant.
Page 8
The Auto mode automatically selects the
operation mode (HEAT, COOL or DRY),
depending on the room temperature when
switched on.
Page 11, 12
HIGH POWER mode
Turning up the power operates the air-condi-
tioner in the power cooling and heating
mode.
ECONOMY mode
This is an economic level of operation.
– 4 –
Page 9
DRY
Page 14
Page 14