Sony KZ-32TS1U Training Manual page 28

Reassembly
In the reverse order of removal:
•
The inside of the TV screen is coated so do not clean or leave oil on it by touching it. The inside surface
scratches easily. Clean the inside of the TV screen if there is film or fingerprints. Use the Sony p/n X-4034-
197-1 soft cloth and diluted mild window cleaner if necessary. A 50% mix of water and window cleaner is OK.
Do not use dishwashing detergent or soaps.
•
Place the screen in the bezel.
•
Mount the rails, B board and stand.
•
Plug in four connectors from the B board into the plasma panel as shown in Figure 9-8. CN9004 next to
connector 2 is not used. The fourth connector is under the B board.
Glass
Plasma Panel
Screen
FIGURE 9-7 - SCREEN UPSIDE DOWN ON FLOOR
Reattach these 4 connectors
1
2
3
FIGURE 9-8 - ATTACH 4 CONNECTORS
9. Plasma Panel Replacement - KZ-42TS1U
Bottom
Top
4
26