Sony KZ-32TS1E Quick Start Manual

KZ-32TS1E Checking the
KZ-42TS1E
Accessories Supplied
Thank you for purchasing this Sony
product. One Remote Control (RM-932):
After following this step by step guide
you will be able to:
One coaxial cable:
Insert Batteries into the Remote
Control.
Connect the AC Cable, Aerial and VCR
to your TV.
One AC Cable (Type C):
Select the language of the menu
screens.
Select the country in which you wish to
operate the set.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
Inserting Batteries into
the Remote Control
GB 4-088-928-01 (1)
©2002 by Sony Corporation Printed in Spain
Ecological Paper - Totally Chlorine Free
1
Two batteries (R6 Type):
Two Brackets:
One Cleaning cloth:
Do not remove ferrite cores.
One AC Cable (Type BF):
Do not remove ferrite cores. Do not remove ferrite cores.
• Use this AC cable (with safety earth) if
Use this AC cable (with safety earth) if
you use the set outside the United you use the set in the United
Kingdom.
Kingdom.
• See "NOTICE FOR CUSTOMERS IN
THE UNITED KINGDOM" on page 2
of the instruction manual when using
the cable.
• This cable may not be supplied
depending on the country.
2
Make sure you insert the supplied batteries using the correct polarity.
Always remember to dispose of used batteries in an environmentally friendly way.
3
Connecting the AC
Cable, Aerial and VCR
• Use the supplied AC cable (type BF, with safety earth).
• Use the supplied coaxial cable for aerial connection.
• Other connecting cables are not supplied.
R/D/D/D L/G/S/I R/D/D/D L/G/S/I
CTRL S
AC IN
R/D/D/D L/G/S/I Y/G P B/ C B/ B P R/ C R/ R HD VD
(W/G/W/G)
(SMARTLINK)
Connect the supplied
cosxial cable.
Connect the supplied AC
cable (Type BF, with
safety earth).
or
VCR
OUT IN
R/D/D/D L/G/S/I R/D/D/D L/G/S/I
CTRL S
AC IN
R/D/D/D L/G/S/I Y/G P B/ C B/ B P R/ C R/ R HD VD
(W/G/W/G)
(SMARTLINK)
• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can
improve picture and sound quality when using it.
• For more details of VCR connection, please refer to the section "Connecting Optional
Equipment" on page 28 of the instruction manual.
If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test
signal to the TV programme number "0" by using the "Manual Programme Preset"
option. (for details of how to manually programme these presets, see page 22, step A of
the instruction manual).
Refer to your VCR instruction manual to find out how to find the output channel of your
VCR.
4
Preventing the TV
from Falling Down
Attach the supplied bracket to the rear of the TV, and pass a sturdy cord or chain through
it to attach it to a wall or pillar. Consult your dealer when attaching the bracket, since the
screws for the bracket also hold the rear cabinet in a place.
1
Remove one of the screws attached at
the rear of the TV.
Do not remove both screws at the
same time as these screws secure
the rear cabinet. Never use the TV
with the screws removed.
2
Attach the supplied bracket with the
screw. Bracket
(supplied)
Be sure to use the screw that
attaches the rear cabinet. A different
screw may damage the TV and
result in electric shock.
3
Repeat steps 1 and 2 to attach the other bracket.
4
Attach a sturdy cord or chain securely to
each bracket on the rear of the TV.
Attach the
sturdy cord
or chain
(not supplied)
securely.
5
Fix the cord or chain to a wall or pillar.
Side view Rear view
Screw a hook (not supplied) to the wall or
pillar securely.