Child Protection Lock - BYD ATTO 3 2022 Owner's Manual

Table of Contents

Advertisement

REMINDER
•The smart key is being carried along
with a communication device, such
as a two-way radio or mobile phone.
•The smart key is in contact with or
covered by a metal object.
•The door handle is operated too
quickly.
•The smart key is too close to the
handle.
•Another wireless remote control
function is being used nearby.
•The smart key battery is exhausted.
•The smart key is close to high-voltage
equipment or equipment that
produces noise.
•The smart key is being carried along
with another smart key or radio-
wave-emitting device.
•Even within the active area, the
smart key may not work properly in
certain locations, for example, on the
dashboard, in the glove box, or on
the floor.
• If the smart access system is not working
properly and it is impossible to enter the
vehicle, the mechanical key can be used
to lock/unlock the driver's door, or the
wireless remote control function can be
used to lock/unlock all doors.
• When the power button is pressed, the
start function may fail due to:
Smart key failure. If the smart key
warning light on the instrument
cluster goes on, and the instrument
cluster displays the message "Smart
key power is low. Please replace the
battery as soon as possible", the
battery of the key may be exhausted.
58
• The smart access and smart start
systems cannot work normally due to
system failures. In this case, bring all
smart keys to a BYD authorized dealer or
service provider for repair.
Saving battery power
Saving battery power
• The smart key communicates with the
vehicle even when the vehicle is not
running. Therefore, do not leave the
smart key in the vehicle or within 2 m
from the vehicle.
• If the smart key receives strong
electromagnetic waves for a long
time, its battery power will be quickly
exhausted. The smart key must be kept
at least 1 m away from the following
devices:
TVs
PCs
Wireless telephone chargers
Electroliers
Fluorescent desk lamps

Child Protection Lock

The child protection lock is designed
to prevent children sitting in the rear
seats from opening the rear doors. Child
protection locks are installed on the left
and right rear doors.
① Slide the manual lock in this direction
to activate either left or right child
protection lock.
② Slide the manual lock in this direction
to deactivate either left or right child
protection lock.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents