2: Sample Print; 3: Self Test - Unipulse M252A Operation Manual

Intelligent dot impact printer
Table of Contents

Advertisement

6. Advanced use

2: Sample Print

Print Every and GT/ST Print formats are printed.
Test print is executed by pressing
■ As a sample, 180 lines are printed in total (approximately 65cm).

3: Self Test

The ROM and RAM of the M252A are tested, and the results are printed.
Press
starts.
Results of test
Normal : 〇
Abnormal : ×
If the result of Self Test is × or the test does not finish normally, the M252A may be faulty.
Ask your deaer representative or for sevicing.
66
Sample of printing (partial)
[3] →
[ENT] in the maintenance mode, and the buzzer sounds and the test
Results of check
* The description of SUM varies depending on the ROM version.
[2] →
[ENT] in the maintenance mode.
(↑ Print continues.)
************************
** SAMPLE PRINT No.3 **
************************
A---00 9876
12345kg
************************
** SAMPLE PRINT No.2 **
************************
05:09 9876
12345kg
************************
** SAMPLE PRINT No.1 **
************************
9876
12345kg
************************
** SAMPLE PRINT No.0 **
************************
--------------------------
>> SUM:2AE
>> ROM:
>> RAM:
>> Checking...
--------------------------

Advertisement

Table of Contents
loading

Table of Contents