Unipulse M252A Operation Manual page 75

6. Advanced use
Cautions in maintenance mode
In the maintenance mode, each operation starts as soon as selection is made from the above
menu ([item No.] →
option setting mode are not printed.
The test mode is an item for a factory check. Do not use this mode. (It is password-locked.)
64
2.
Since a list of items in the maintenance mode is printed, select a target
item.
To perform a test printing:
operating
To perform a sample printing:
To perform a self test:
To print a parameter list:
To enter the test mode:
To cancel or end the maintenance mode:
Since the item No. of Test Print is [1], press
[ENT]. As soon as
printing starts.
[ENT]). A confirmation message as in the setting mode and in the
--------------------------
Cancel/End -->ESC
Test Mode -->5-ENT
Parameter List -->4-ENT
Self Test -->3-ENT
Sample Print -->2-ENT
Test Print -->1-ENT
--------------------------
--------------------------
Maintenance
==========================
[ENT] is pressed, a test
［1］ → [ENT］
［2］ → [ENT］
［3］ → [ENT］
［4］ → [ENT］
［ESC］
[1] →