Unipulse M252A Operation Manual page 40

Examples of print
6. Diagram
Input data Displacement diagram
Lower
limit
-0.2
48.7
78.5
102.1
｛
TARGET: 50.0kg
Example
RANGE: 50.0kg
8. Double print
Ach input data
500.0kg
1444.0kg
150.5kg
10. Double print with code
Code
Code
Ach input data
HIGK
STU 300.0kg
HIGK
STU 450.0kg
HIGK
STU 500.0kg
Characters sent from the RS-232C
through print with the
through print,an offline state will result, so that through print cannot be performed. If the
[PRINT] key is ressed again, an online state will result, so that through print can be
performed. FEED (paper feed) is valid only in an offline state.
Target Upper
Value limit
Bch input data
389.3kg
78.1kg
420.2kg
Bch input data
389.3g
789.3g
389.3g
12. Through print
interface
in ASCII code are printed as they are. Start/stop
[PRINT] key. If the
4. For greater use of the printer
7. Double size print (data)
Input data
500.5kg
450.2kg
1200.0kg
-385.8kg
55.0kg
Input data is printed horizontally
double size. However, the unit can be
printed only up to four characters.
9. Double print with count
Count Bch input data
Count Ach input data
3
46 500.0kg
2
45 1444.0kg
1
44 150.5kg
11. Ach <-- A or B
Count Bch input data
Count
Ach input data
7
6 300.0kg
5
4 450.0kg
3
2 500.0kg
[PRINT] key is pressed during
389.3kg
78.1kg
420.2kg
389.3kg
789.3kg
389.3kg
29