Unipulse M252A Operation Manual page 23

2. Printer preparations
Enlarged section
← Front
Guide
Note
It may cause some trouble if you pull the paper fast or backward when the paper jam occurred during the
paper setting.
Please pull the paper in the direction of the arrow A slowly and straight to remove it after stopping the
paper feed.
Cut the power then on again when it doesn't return normally after removing the paper.
12
3.
Pass the end of the roll paper under the guide bar at the lower part of the
flip panel, and insert it between the guide bar and guide.
Press the [FEED] key with the paper inserted, and release the key
when the paper comes out of the paper ejection slot.
Roll paper
Guide bar
4.
Remove the flexure of the roll paper, and push in the push panel firmly until
you hear it click.
A