Sony KDL-32XBR4 Service Manual page 67

KDL-40D3000 ONLY
HDMI CABLE (CONTINUED)
CAUTION:
Cable is touching panel.
KDL-32XBR4/40D3000
USE Sheet Core C to hold LVDS/Left Speaker Wire to panel here
Make sure HDMI
Center conductive tape over Black
UL tape on LVDS (last black tape on
harness).
Use Panel Edge as guide for edge of
the conductive tape.
Apply Cushion D OVER conductive tape.
Use panel edge as guide.
Make sure to COVER the conductive
tape with Cushion D (TVSR regulation)
KDL-32XBR4/40D3000
OPERATION PROCESS
Route/Dress HDMI Cables as shown.
CAUTION: Make sure HDMI cable is
touching panel, especially in between
Sheet Core C.
2-688-010-01
4-092-814-02
67