Sony KDL-32XBR4 Service Manual page 37

KDL-32XBR4 ONLY
LVDS CABLE - BU BOARD TO BH BOARD
3
KDL-32XBR4/40D3000
1
Install HDMI Cable on BU-Bd
(CN5504)
NOTE: COLOR OF Round
Sticker
BEFORE Installing DTT Shield
Top,
GENTLY fold cables over
2
towards right as shown.
Too much pressure applied to
cable/connector when folding
cables over to right side WILL
damage the connector!!
4
After DTT Shield Top installation, use
3x5mm screw to secure GND tab on
HDMI Harness.
NOTE:
SIDE HDMI Cable will have conductive
tape wrapping on PP/MP parts.
Running change to eliminate tape wrapping.
1. Attach HDMI Connector to BU-Bd
2. GENTLY fold over cables to right side.
3 CONFIRM Color of Sticker (RED)
4. After Installing DTT Top apply 3x5mm
(RED)
.
KDL-32XBR4/40D3000
OPERATION PROCESS
(CN5502).
screw to GND Ring on HDMI Assy.
TORQUE SPECIFICATION
TORQUE: 6kg.cm (+-1.0kg.cm)
37