2-1. USING THE REMOTE COMMANDER
FOR ELECTRICAL ADJUSTMENTS
To adjust various set features, use the Remote Commander to put the
set into service mode to display the service menus and categories.
Equipment Needed:
Pattern Generator (with component outputs)
Oscilloscope
Digital multimeter
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
DISPLAY
5
VOLUME+
RM-YD014
The fi rst service menu (TV) displays.
KDL-32XBR4/40D3000
SECTION 2: SERVICE ADJUSTMENTS
Volume +
POWER .
POWER
Onscreen cursor
and select button
2-3. VIEWING THE SERVICE MENUS
Use the Remote Commander to view the BE and Digital service menus
options.
1. To display the Service Menu that contains the Category you want to
adjust, press JUMP on the Remote Commander.
(For a complete list of the service Categories refer to Service Menus)
BE
TV
001
COLOR ADJ
001
R_DRV
DIGITAL PROGRAM
DATA
BE
PROGRAM
NVM
PACK
BOOT
Press JUMP
DIGITAL
QM
0
0
SERVICE
INFO
Press JUMP
Sample TV Service Menu
KDL-32XBR4/40D3000
SERVICE
00100
: h07-00.79T DEV
: 000011
: TMO.620
: TDO.426
: TPA.014
: TBO.506
DTV
69