Sony KDL-32XBR4 Service Manual page 38
Wax3 chassis lcd digital color television
Hide thumbs
Also See for KDL-32XBR4:
- Operating instructions manual (48 pages) ,
- Specifications (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
KDL-32XBR4 ONLY
LVDS CABLE - BH BOARD TO TCON
Apply 3X8mm screw
when installing BH Shield Top
1
CAUTION:
NOTE COLOR OF TAPE ON LVDS HARNESS!
PROPER COLOR IS WHITE.
*LVDS HAS 2 GROUNDING TABS!
KDL-32XBR4/40D3000
NOTE: LVDS Cable is OVER ALL cables
2
Apply 3X8mm screw
when installing DTT Shield Top
Not used in final design
1. Route 40P LVDS Cable between
2. Apply 3x8mm Screw (2-places) to ground
2
KDL-32XBR4/40D3000
OPERATION PROCESS
BU-Bd and TCON as shown.
LVDS cable.
Put Attention on Routing of Cable.
G1 to BU cables are on TOP of LVDS.
H3-Bd cables are UNDER LVDS.
TORQUE SPECIFICATION
3mm TORQUE: 6.0kg-cm (+-1.0kg-cm)
38
Hide quick links:
Advertisement
Table of Contents
