D1 Board And G3 Board (Power Unit) Removal (Kdl-40D3000 Only); Replacing The Inverter Connector Assembly (Kdl-40D3000 Only) - Sony KDL-32XBR4 Service Manual

1-9. D1 BOARD AND G3 BOARD (POWER UNIT) REMOVAL (KDL-40D3000 ONLY)

1
Disconnect 5 connectors
2
Remove 4 screws, +PSW 3SG
3
Disconnect 4 connectors
4
Remove 4 screws, +PSW 3SG

1-9-1. REPLACING THE INVERTER CONNECTOR ASSEMBLY (KDL-40D3000 ONLY)

Use the following procedure to confirm that the connector is securely attached to the In
1
After inserting the connector
into the Inverter board,
push the middle section
of the inverter connector to
lock on the terminal.
KDL-32XBR4/40D3000
4
D1 Board
3
2
Push the right section of
the inverter connector and
confirm it is securely
connected.
2
1
G3 Board
G3 Bracket
3
Push the left section of
the inverter connector and
confirm it is securely
connected.
KDL-32XBR4/40D3000
16