Kontron Embedded Computers PCI-760 User Manual page 75

10.7.1.3. Configure DRAM Timing by SPD
The available settings are: Enabled and Disabled .
If the [ Configure DRAM Timing by SPD ] option is set to " disabled " are available additional settings (refer to the
picture below).
10.7.1.4. DRAM CAS# Latency
Available settings: 3, 4, 5 and 6 .
10.7.1.5. DRAM RAS# to CAS# Delay
Available settings: 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks and 6 DRAM Clocks .
10.7.1.6. DRAM RAS# Precharge
Available settings: 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks and 6 DRAM Clocks .
10.7.1.7. DRAM RAS# Activate to Precha
Available settings: 9 DRAM Clocks, 10 DRAM Clocks, 11 DRAM Clocks,
12 DRAM Clocks, 13 DRAM Clocks, 14 DRAM Clocks and 15 DRAM Clocks.
10.7.1.8. Memory Hole
In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped
into the memory space 15MB-16MB.
The available settings are: 15MB-16MB and Disabled .
10.7.1.9. Initiate Graphic Adapter
These settings allow you to select the graphics controller used as primary boot device.The available settings are: IGD,
PCI/IGD.
PEG : PCI Express Graphics
PCI : PCI Device
10.7.1.10. PEG Port Configuration
PEG Port: Available settings are: Disabled and Auto .
PCI-760 – User's Manual (V1.00)
10. AMI BIOS Configuration
73